What are the precautions for the use of pelletizer? – Suzhou Polytime Machinery Co., Ltd.

Plastic products have the characteristics of low cost, lightweight, high strength, corrosion resistance, convenient processing, high insulation, beautiful and practical. Therefore, since the advent of the 20th century, plastic products have been widely used in household appliances, automobiles, buildings, electronic appliances, information technology, communication, packaging, and other aspects. However, because plastic products are easy to be damaged, difficult to degrade naturally, and easy to aging, the proportion of waste plastics in the waste is increasing, the environmental pollution caused by it is becoming more and more serious, and the recycling of waste plastics has been paid more and more attention.

Here is the content list:

What are the uses of the pelletizer?

What are the precautions for the use of pelletizer?

What are the uses of the pelletizer?
Plastic pelletizer is the most widely used, widely used, and most popular plastic recycling processing machine in the waste plastic recycling industry. It is mainly used for processing waste plastic films (industrial packaging film, agricultural plastic film, greenhouse film, beer bag, handbag, etc.), woven bags, agricultural convenience bags, pots, barrels, beverage bottles, furniture, daily necessities, etc. It is suitable for most common waste plastics.



What are the precautions for the use of pelletizer?
1. The operator must be careful when filling, do not put sundries in the material, and master the temperature. If the material does not stick to the die head when starting up, the die head temperature is too high. It can be normal after a little cooling. Generally, there is no need to shut down.

2. Generally, the water temperature should be 50-60 鈩? If it is lower, it is easy to break the strip, and it is easy to adhere. It is best to add half of the hot water at the initial startup. If there is no condition, people can deliver it to the pelletizer for some time, and let it cut the grain automatically after the water temperature rises to avoid breaking the strip. After the water temperature exceeds 60 鈩? it is necessary to add cold water inward to maintain the temperature.

3. During pelletizing, the strips must be pulled evenly before entering the mixing roller, otherwise, the pelletizer will be damaged. If the exhaust hole is competing for material, it proves that the impurities have blocked the filter screen. At this time, the machine must be shut down quickly to replace the screen. The screen can be 40-60 mesh.

Because of its good performance, plastics are more and more widely used in life, and a large number of waste plastics will be produced at the same time. Therefore, the research on the plastic recycling process is of great significance to save resources and environmental protection. Moreover, the level of plastic recycling in China is not high, and the whole plastic recycling industry is still in the stage of rapid development, so the development prospect is broad. The plastic extruder, granulator, pelletizer, plastic washing machine recycling machine, and other products of Suzhou Polytime Machinery Co., Ltd. are exported all over the world and have established many sales centers at home and abroad. If you have a demand for a pelletizer, you can understand and consider our high-quality equipment.